![]() ![]() This was a perfect use case for the Move Face command as it allowed quick and easy design iteration in combination with a 3D printer, and as the design was nearly complete the small loss in associativity was acceptable. ![]() ( STL ) file derived from a CAD model is installed into a slicer tool. Also, by performing this operation before the mirror feature both arms would be affected. This technique has demonstrated notable effi- ciency in the. Because the clearance cut was made with a Through All end condition, the added material would still be cut away to let the pieces fit together. The rollback bar was moved above the dovetail clearance cut and mirror feature. ![]() To quickly add material to the arms, the Move Face command was used. However, it did mean the arms were undersized for how much tension they were under. The dovetail joint can slide on and off the Blendr mount to let the light and adapter assembly come off the bike for cleaning or charging. This was good because the light doesn’t need to detach from the adapter very often, if at all. After printing the model, the fit between the arms and light was much tighter than expected. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |